GB/T 3519-2008 微晶石墨

作者:标准资料网 时间:2024-05-12 21:33:55   浏览:9715   来源:标准资料网
下载地址: 点击此处下载
基本信息
标准名称:微晶石墨
英文名称:Amorphous graphite
中标分类: 建材 >> 炭素材料 >> 石墨材料
ICS分类: 采矿和矿产品 >> 非金属矿
替代情况:替代GB/T 3519-1995
发布部门:中华人民共和国国家质量监督检验检疫总局 中国国家标准化管理委员会
发布日期:2008-08-20
实施日期:2009-04-01
首发日期:1983-03-10
作废日期:
主管部门:全国非金属矿产品及制品标准化技术委员会(SAC/TC 406)
提出单位:中国建筑材料工业协会
归口单位:全国非金属矿产品及制品标准化技术委员会(SAC/TC 406)
起草单位:咸阳非金属矿研究设计院
起草人:司玉华、张罕博
出版社:中国标准出版社
出版日期:2009-04-01
页数:8页
计划单号:20078446-T-609
适用范围

本标准首次发布于1983年,1995年进行了第一次修订,本次是第二次修订。
本标准规定了微晶石墨的定义、分类和标记、要求、试验方法、检验规则、包装、标志、运输和贮存等。
本标准适用于天然微晶石墨。
本标准代替GB/T 3519-1995《微晶石墨》。与GB/T 3519-1995相比,本标准做了如下修改:
———增加了产品标记;
———删除了表1和表2关于“对细度有特殊要求者,由供需双方商定”的表注;
———表2中的“WT”修改为“w”;
———第5章有铁要求的微晶石墨理化指标及性能中增加WT99.99-45、WT99.99-75、WT99.9-45、WT99.9-75四个产品牌号;
———第5章中增加5.2.3关于“其他需要说明的性能指标(如硫等)可由供需双方商定”;
———增加了取样的具体方法;
———删除7.5.4有关对产品质量或检验结果有异议时的处理;
———将8.1中微晶石墨净重“1000kg±10.0kg”修改为“1000kg±2kg”;
———第8章的产品标志内容增加了产品标记;“每批产品均应有合格证”修改为“每袋产品均应有合格证”。

前言

没有内容

目录

没有内容

引用标准

下列文件中的条款通过本标准的引用而成为本标准的条款。凡是注日期的引用文件,其随后所有的修改单(不包括勘误的内容)或修订版均不适用于本标准,然而,鼓励根据本标准达成协议的各方研究是否可使用这些文件的最新版本。凡是不注日期的引用文件,其最新版本适用于本标准。
GB/T3520 石墨细度试验方法
GB/T3521 石墨化学分析方法

所属分类: 建材 炭素材料 石墨材料 采矿和矿产品 非金属矿
下载地址: 点击此处下载
Product Code:SAE AS1034
Title:Fitting, Elbow, 90 Degrees, Standard and Reducer, Flared
Issuing Committee:G-3, Aerospace Couplings, Fittings, Hose, Tubing Assemblies
Scope: No scope available.
Rationale: No scope available.【英文标准名称】:StandardSpecificationforAluminum-AlloyExtrudedStructuralPipeandTube
【原文标准名称】:铝合金挤压结构管和管件的标准规范
【标准号】:ASTMB429/B429M-2010
【标准状态】:现行
【国别】:美国
【发布日期】:2010
【实施或试行日期】:
【发布单位】:美国材料与试验协会(US-ASTM)
【起草单位】:B07.03
【标准类型】:(Specification)
【标准水平】:()
【中文主题词】:
【英文主题词】:aluminumalloy;extrudedpipe;extrudedtube;Aluminum--specifications;Aluminumalloys(pipe)--specifications;Aluminumalloys(structural)--specifications;Aluminumalloys(tube)--specifications;Aluminumpipe--specifications;Aluminumtube--specificati
【摘要】:empersshownin,andinthosestandardsizesshownin,aswellasinothernonstandardsizesasagreeduponbetweenthepurchaserandsupplier.Suchpipeandtubeisintendedforuseinstructuralapplicationssuchashighwayandbridgerails,chain-linkfenceposts,handrails,signstructures,awningsupports,lightingbrackets,etc.Structuralpipeandtubeisnotintendedforfluid-carryingapplicationsinvolvingpressure.Note1FordrawnseamlesstubeusedinpressureapplicationsseeSpecificationsB210andB210M,forseamlesspipeandseamlessextrudedtubeusedinpressureapplicationsseeSpecificationsB241/B241M,andfordrawntubeandpipeforgeneralpurposeapplicationsseeSpecificationB483/B483M.1.2AlloyandtemperdesignationsareinaccordancewithANSIH35.1.TheequivalentUnifiedNumberingSystemalloydesignationsarethoseofprecededbyA9,forexample,A96061foralloy6061inaccordancewithPracticeE527.1.3Foracceptancecriteriaforinclusionofnewaluminumandaluminumalloysinthisspecification,see.1.4UnitsThevaluesstatedineitherinch-poundunitsorSIunitsaretoberegardedseparatelyasstandard.SIunitsareshowninbrackets.Thevaluesstatedineachsystemmaynotbeexactequivalents;thereforeeachsystemshallbeusedindependentlyoftheother.Combiningvaluesfromthetwosystemsmayresultinnon-conformancewiththespecification.1.4.1WhilethisstandardisacombinedSIandinch-poundstandard,standardpipesizesarenotapplicabletoSIunits,thereforenon-rationalizedSIunits(softconversions)areshownforreaderconvenience.Rationalized[hardconverted]SIunitsareshowninbracketswhilenon-rationalized(softconverted)SIunitsareshowninparentheses.Thisstandarddoesnotpurporttoaddressallofthesafetyconcerns,ifany,associatedwithitsuse.Itistheresponsibilityoftheuserofthisstandardtoestablishappropriatesafetyandhealthpracticesanddeterminetheapplicabilityofregulatorylimitationspriortouse.
【中国标准分类号】:H61
【国际标准分类号】:77_150_10
【页数】:10P.;A4
【正文语种】:英语